Logo
Home | Diagnostic software | Other tools | About us | Where to buy
www.auto-diagnostics.info

ToCOM: Professional Toyota/Lexus Diagnostic Software

ToCOM allows you to perform complete diagnostics of all 1996-present models. Diagnostics is performed via OBD-II connector (which is located near steering wheel).

You can order ToCOM from our sister website www.obdtester.com/tocom for $379 or € 299.

Supported functions

Unlike other universal car scanner tools which only read fault codes, this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).

The following diagnostic functions are supported:

Read identification
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...

Read fault codes
Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").
Program supports report printing or copy to clipboard.

Clear fault codes
This function clears all stored fault codes and other diagnostic information.

Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.

Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.

Actuator test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)

Programming functions/Adaptation
This feature is of great importance in all vehicles because systems like Engine control units, Immobilizers, Airbags, Alarms, Body Control Units, and some others, require you to perform reset or programming procedures after car repair is done, or even configuration after replacing broken Control Unit.

Hardware and software requirements

Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP/7/8/10 with the latest service pack installed.

Price

Price: 299 EUR / 379 USD

See also

Contactform

If you need more information about our products, please use this form. You can also mail us at <[email protected]>.
First name
Last name
Enter question, request, or comment here:

Company/Department
Email

Phone

Region


Related information

©2005-2007 SECONS Ltd.   All rights reserved